Ready Mix Concrete Plants in Mumbai
Aparna RMC serves Mumbai construction sites through ready-mix concrete plants across the Mumbai Metropolitan Region (MMR). The areas served include Bhiwandi on the Thane side, a western-suburbs plant, and Turbhe and Ulwe in Navi Mumbai. It supplies concrete in grades M5 to M80 for residential, commercial, and infrastructure projects. For a Mumbai RMC quote, call 📞91540 88440.
Aparna RMC Plant Locations Across the Mumbai Metropolitan Region
Aparna RMC serves Mumbai through ready-mix concrete plants located across the Mumbai Metropolitan Region (MMR), rather than inside Greater Mumbai’s municipal limits. Ready mix concrete is supplied to Mumbai sites from two belts. The Thane side – Bhiwandi and Mira Road- and Navi Mumbai (Turbhe and Ulwe). Full addresses and areas served for each plant are below; all enquiries are currently routed through Aparna RMC’s central number, 📞91540 88440
Ready Mix Concrete Plant at Bhiwandi, Thane District
Aparna RMC Plant, Mankoli, Bhiwandi, Mumbai, 421302, Maharashtra. This plant produces customised concrete for diverse construction needs, supplying Thane district and the Kalyan–Dombivli belt.
Areas served: Mulund, Bhiwandi, Kalwa, Airoli, Vikhroli, Ghatkopar, Kalyan, Dombivli, Ulhasnagar, Rabale
Ready Mix Concrete Plant at Mira Road, Mira-Bhayandar
Ready Mix Concrete Plant at Turbhe, Navi Mumbai
Aparna RMC Plant, Turbhe, Survey No. 183, Kukshet TTC Industrial Area, MIDC Turbhe, Navi Mumbai – 400703. This plant supplies Navi Mumbai, Thane, Vashi, Airoli, Kharghar and Panvel with customisable concrete solutions for residential, commercial and large-scale infrastructure projects.
Areas served: Mahape, Taloja, Kalamboli, Vichumbe, Palaspa, Wahal, Khandeshwar, Panvel, Seawoods, Sanpada, Rabale, Kharghar, Ghatkopar, Kalyan, Dombivli, Mankhurd
Ready Mix Concrete Plant at Ulwe, Navi Mumbai
Aparna RMC Plant, Ulwe, Survey No. 431/2, 429/0, Gavhan Phata, Wahal Gavhan Road, Wahal Village, Raigad District – 410206, Maharashtra. This plant uses advanced admixtures and additives to deliver durable, high-strength concrete for residential, commercial, and infrastructure projects.
Areas served: Bambavi, Padeghar, Wahal, Bamandonri, Shelghar, Jasai, Jawle, Sector-10/B, Khar Kopar, Moha, Targhar, Kombadbhuje
Summary Table of Locations in MMR
Plant | Region | Address | Areas served | Contact |
|---|---|---|---|---|
| Bhiwandi | Thane district | Mankoli, Bhiwandi, 421302, Maharashtra | Mulund, Bhiwandi, Kalwa, Airoli, Vikhroli, Ghatkopar, Kalyan, Dombivli, Ulhasnagar, Rabale | 📞91540 88440 |
| Mira Road | Mira-Bhayandar | 7VRQ+4C8, Mira Bhayandar, 400064 | Dahisar, Borivali, Kandivali, Goregaon, Malad, Jogeshwari, Ram Mandir, Andheri, Santacruz, Vile Parle, Vasai-Virar | 📞91540 88440 |
| Turbhe | Navi Mumbai | Survey No. 183, MIDC Turbhe, Navi Mumbai – 400703 | Mahape, Taloja, Kalamboli, Vichumbe, Palaspa, Wahal, Khandeshwar, Panvel, Seawoods, Sanpada, Rabale, Kharghar, Ghatkopar, Kalyan, Dombivli, Mankhurd | 📞91540 88440 |
| Ulwe | Navi Mumbai | Survey No. 431/2, 429/0, Gavhan Phata, Wahal Village, Raigad District – 410206 | Bambavi, Padeghar, Wahal, Bamandori, Shelghar, Jasai, Jawle, Sector-10/B, Khar Kopar, Moha, Targhar, Kombadbuje | 📞91540 88440 |
Ready Mix Concrete in Navi Mumbai
Aparna RMC operates two ready-mix concrete plants in Navi Mumbai — at Turbhe and at Ulwe. The Turbhe plant covers a belt including Sanpada, Seawoods, Rabale, Kharghar, Panvel, Kalamboli and Taloja, plus Ghatkopar, Kalyan and Dombivli. The Ulwe plant covers the immediate Ulwe–Panvel locality cluster, including Jasai, Khar Kopar, Padeghar and Sector-10/B.
Explore RMC plants at Turbhe and Ulwe for full address and coverage details:
https://www.aparnarmc.com/aparna-ready-mix-concrete-plant-at-turbhe/
https://www.aparnarmc.com/aparna-ready-mix-concrete-plant-at-ulwe
Ready Mix Concrete Delivery Areas Across Mumbai
As ready mix concrete is time-bound in transit, each plant’s delivery radius is set by how far a mix can travel and still be placed within the pour-ready time. Coverage is organised by zone:
- Navi Mumbai & Panvel belt — served from Turbhe and Ulwe
- Thane district & Kalyan–Dombivli — served from Bhiwandi
- Western suburbs — Mira-Bhayandar, Dahisar, Borivali, Kandivali, Goregaon, Malad, Andheri, Vasai-Virar — served from the Mira Road plant
Ready Mix Concrete Price in Mumbai
Prices vary from project to project or your needs because it depends on various factors like grade, volume, distance from plant, pump hire, and others.
- Grade: Higher grades (M35, M40 and above) will cost more per cubic metre than standard M20/M25 mixes. This is because higher-strength structural requirements need greater cement and additive ratios.
- Volume/slab booking: Larger, pre-booked pours get better per-unit pricing than small or ad-hoc orders. Ordering less than minimum quantity will cost more. Huge pours scheduled in advance will also cost less.
- Distance from plant: Transporting fresh, wet concrete through Mumbai’s traffic is challenging. Sites located at longer distances from the plant add transport cost and affect scheduling. Projects close to the batching plant will result in lower costs, and longer distances will cost more.
- Pump hire: pumping service also affects the cost. Boom or line pump hire is charged separately from the concrete itself.
Concrete Grades & Special Concrete Available in Mumbai
Refer to the table below for standard concrete compressive grades (M5 to M80), and specialty ready-mix concretes visible in the site’s menu are mapped below.
In Indian Standards (IS 456), “M” stands for Mix, and the number indicates its minimum characteristic compressive strength in Newtons per square millimetre (N/mm² or MPa), after 28 days of curing
Concrete Grades Scale (M5 to M80)
Concrete Type | Grade | Mix Style | Compressive Strength | Typical Applications in Mumbai |
|---|---|---|---|---|
| Lean / Ordinary Concrete | M5 | Nominal (1:5:10) | 5 N/mm2 | Mud matting, leveling courses, non-structural mass filling. |
| Lean / Ordinary Concrete | M7.5 | Nominal (1:4:8) | 7.5 N/mm2 | Sub-base layers under shallow foundations and brick wall bedding. |
| Lean / Ordinary Concrete | M10 | Nominal (1:3:6) | 10 N/mm2 | Plain Cement Concrete (PCC) pathways and patio sub-flooring. |
| Lean / Ordinary Concrete | M15 | Nominal (1:2:4) | 15 N/mm2 | Drainage works, retaining structures for low-height boundary walls. |
| Lean / Ordinary Concrete | M20 | Nominal (1:1.5:3) | 20 N/mm2 | Minor residential framing, internal staircases, lintels. |
| Standard Concrete | M25 | Nominal / Design | 25 N/mm2 | Core residential construction (slabs, columns, beams, individual foundations). |
| Standard Concrete | M30 | Design Mix | 30 N/mm2 | Heavy-load structural frames, coastal zone slabs, commercial buildings. |
| Standard Concrete | M35 | Design Mix | 35 N/mm2 | Industrial floors, piling foundations, multi-story basement structures. |
| Standard Concrete | M40 | Design Mix | 40 N/mm2 | High-rise podiums, bridge decks, and heavy vehicular road pavements. |
| High & Ultra-High Strength Concrete | M45 to M55 | Design Mix | 45 – 55 N/mm2 | Pier foundations, high-rise structural shear walls, infrastructure pylons. |
| High & Ultra-High Strength Concrete | M60 to M80 | Design Mix | 60 – 80 N/mm2 | Ultra-tall skyscraper building cores, marine coastal structures, specialized defense installations. |
Specialty Ready-Mix Concrete Variants
These specialty mixes are engineered for urban or specific aesthetic applications:
Specialty Type | Functional Properties & Core Target Use Cases |
|---|---|
| High Grade Ready-Mix Concrete | Structural mixes at M40 and above optimized for rapid early strength gain in high-rise building cores. |
| Slab Ready-Mix Concrete for IHB | Specifically batch-optimized for Individual House Builders to minimize surface shrinkage cracks on open roofs. |
| Self-Compacting Concrete (SCC) | Highly fluid mix that flows through heavily congested steel reinforcements without vibrating machine assistance. |
| Smart Dynamic Concrete | Low-viscosity, self-consolidating mix designed for speed and smooth aesthetic surface finishes. |
| Green / Eco-Friendly Concrete | Incorporates industrial by-products like fly ash or GGBS to drastically decrease the total carbon footprint. |
| Colour & Stamp Concrete | Textured, pigmented architectural concrete mixes curated for decorative driveways, walkways, and landscaping. |
| Lightweight RMC | Uses expanded aggregate options to decrease structural dead load on elevated framing or roof slopes. |
| Fiber & Steel Fiber Reinforced | Interlocking micro/macro fibers to distribute localized stress and resist high-impact friction cracks. |
| Temperature Control Concrete | Chilled mix using ice-flaked water to block thermal cracking inside thick, deep mass raft foundations. |
| Glass Fiber Reinforced (GFRC) | Lightweight, highly durable composite mix utilized heavily for building facades and complex architectural molds. |
| Porous / Pervious Concrete | Highly permeable composition that lets stormwater filter safely through into the soil, preventing urban puddles. |
| Bag Ready-Mix Concrete | Pre-blended, dry concrete packed neatly in bags for small-scale repair work or tight, hard-to-reach job locations. |
| Polypropylene Fiber Concrete | Integrates synthetic polymer mesh fibers to counter early-stage plastic shrinkage cracking in hot weather. |
Why Mumbai Construction Projects Use Ready Mix Concrete?
Ready-mix concrete is preferred for construction in Mumbai due to severe space constraints for on-site storage, the need to navigate dense, occupied neighborhoods, and to ensure high-grade consistency for high-rise projects.
Also, the city’s strict material-handling regulations and monsoon moisture requirements necessitate industrial, controlled-plant concrete, with production and delivery governed by IS 4926 (2003): Code of Practice Ready-Mixed Concrete.
How RMC Delivery Works in Mumbai?
- After requirements are shared with the plant or sales team, a site visit will be scheduled.
- Mix design is finalised.
- Batching takes place at the nearest plant to the site.
- Transit-mixer delivery to site, within the mentioned time.
- Pumping and placement support at the site.
- Cube casting for quality testing.
In Mumbai, delivery is planned around traffic windows, with night pours scheduled for large slabs where road congestion would otherwise delay a pour-ready mix.
Quality Assurance at Aparna RMC Mumbai Plants
Aparna RMC’s Mumbai-serving plants run fully automated, computerised batching, with mix designs prepared per IS 10262:2019 and concrete conforming to IS 456:2000 and IS 4926. Aggregate and cement sourcing is quality-checked before batching.
Mumbai Projects & Clients Supplied by Aparna RMC
Aparna RMC supplied high-grade ready-mix concrete tailored to these specific Mumbai projects and developers.
- Prestige City
- Sheth Developers
- Raheja Universal
- Sobha Developers
- Chandak Group
How to Choose an RMC Supplier in Mumbai - Checklist
- Transit time from your site
- Grades and special mixes available
- Batching automation and QC lab
- IS 4926 / IS 456 compliance
- Fleet size and pump availability
- Slab-booking flexibility and minimum order quantity
- Technical support for mix selection
Aparna RMC meets these criteria across its plants in the Mumbai Metropolitan Region.
Frequently Asked Questions
Price per cubic metre depending on grade, quantity, distance, and pumping needs. So to get the right price, request a quote in the Mumbai region.
Yes. It has two plants, one at Turbhe and the other at Ulwe. Turbhe covers Sanpada, Seawoods, Rabale, Kharghar, Panvel and Taloja; Ulwe covers Jasai, Khar Kopar, Padeghar and Sector-10/B. See the linked plant pages for full details.
At Aparna RMC, the minimum order is 1 cubic meter, with potential load charges based on distance and mix type, while bulk orders include custom scheduling.
The maximum transit time for RMC to be poured before it sets is 3 to 3:30 hours. It is dosed with a retarder for longer leads, so the mix stays workable on arrival.
Residential slabs use M20 or M25 grade concrete, though the right grade depends on structural design load. Before ordering, confirm the grade and other information with your structural engineer.
Yes. RMC is delivered in the monsoon with pour scheduling planned around weather windows. Waterlogging and traffic congestion during rains will extend travel times beyond the standard 90-minute concrete setting window.
"Location maps are for indicative purpose only"
